Freshwater tank

Freshwater tank

Postby rnavakas » Tue Mar 29, 2011 9:23 pm

Cleaning and replacing the hoses on my freshwater tank (located amidships below the sole). The outlet hose runs into the internal engine bay and then through to the galley basin. Reaching it will be a bit of a pain but I think I can undo the hose clamp and replace the rather worn and discoloured hose. What I can't find however is the breather hose for the tank. Does anyone have any idea where the breather / vent hose might be found?
rnavakas
 
Posts: 4
Joined: Thu Feb 03, 2011 4:16 pm

Re: Freshwater tank

Postby Dolphin » Tue Mar 29, 2011 9:30 pm

There isnt one! You probably have heard the water suck back through the hand pump in the galley and the air follow it.
Greg.
Greg
Felicite Mk III
Lake Macquarie
"After it's all said and done, there is a lot more said than done!" Aesop 620 BC
User avatar
Dolphin
 
Posts: 730
Images: 31
Joined: Tue Jun 16, 2009 11:38 pm
Location: Lake Macquarie

Re: Freshwater tank

Postby Killick69 » Thu Mar 31, 2011 8:39 am

HI all, had assumed the water tank (GRP) in the sole of Night Cap has no vent. Greg, now that you mention the suckback it all makes sense. The inspection hatch seals pretty well. So I guess a vent will make the foot pump deliver in a more regular manner. Next time I am on the boat I will see if footpump delivers better with the inspection/filler cover removed and if this is the case I will arrange a vent. Anyone got any ideas how to fit a vent. Easiest I guess would be a hole in the cap of the filler/inspection cover, with small filter on it to prevent dirt getting in. Any suggestions?

Special hose is available from Witworths/Bias. but price for 10 metres drinking hose from Bunnings is $36 from memory. If access is an issues, you might be able to tape the new hose to old and pull the new hose through. Just wondering how old the hose on Night Cap is and whether it is drinking water quality hose.
Killick69
 
Posts: 279
Joined: Tue Aug 10, 2010 4:26 pm

Re: Freshwater tank

Postby Miker » Thu Mar 31, 2011 12:18 pm

Might be easier to fit an electric galley pump, for about $100, you can get a 12 volt pump with a pressure switch and a standard faucet tap. Works really well, and so long as you isolate the batteries when not on board you'll be safe from the tap accidentally leaking and emptying the tank into the sink and overflowing.

Michael
Michael
"Dulcamara" - MKIII
Careel Bay, Pittwater
"Order of the Tipping Dinghy" 2017
Miker
 
Posts: 845
Images: 6
Joined: Mon Apr 06, 2009 2:15 pm
Location: Pittwater NSW

Re: Freshwater tank

Postby Phillip » Thu Mar 31, 2011 12:32 pm

Afternoon All,

I use a foot pump, Whitworths 68155, and I do not have an air vent as its not necessary.

The internal valves of the foot pump keep the water up OK, but most important it works.
I also had trouble with the hand pumps and brought 2 before finally fitting the foot pump.

Phillip.
Phillip.
SEAKA
A 1969 Mark 1



Home port is at Dunbogan on the Camden Haven Inlet, Laurieton NSW
User avatar
Phillip
Site Admin
 
Posts: 1826
Images: 152
Joined: Wed Jan 07, 2009 8:18 pm
Location: Camden Haven Inlet, Mid-North Coast NSW.

Re: Freshwater tank

Postby ozzibod » Thu Mar 31, 2011 7:52 pm

Good evening folks.
I have a MK 1 launched in 1969. I don't know if the tanks and vents are the same through the different marks but my boat appears to have a tank vent by way of a copper tube running up beside the starboard verticle piece of reinforcing timber on the main bulkhead. The main bulhead has a reinforcing piece of oregon pine on ether side of the door through to the v berth. Beside and hidden from immediate view on the starboard side is the copper vent on the v berth side of the bulkhead. It comes about half way up the bulkhead towards the underside of the mast step.
I know this is a long winded explaination and I do apologise. I can't quite find a better way to explain it.
Also, the vent on my boat may be a one-off. I don't know but would be interested if other owners have noticed one.

cheers
Austin
Sintra 11
ozzibod
 
Posts: 24
Joined: Wed Feb 04, 2009 9:43 am
Location: Montague Bay, Derwent River, Hobart

Re: Freshwater tank

Postby Phillip » Fri Apr 01, 2011 8:08 pm

Austin,

I have something like that, thought it was an electrical thing, will check it out tomorrow.

Phillip
Phillip.
SEAKA
A 1969 Mark 1



Home port is at Dunbogan on the Camden Haven Inlet, Laurieton NSW
User avatar
Phillip
Site Admin
 
Posts: 1826
Images: 152
Joined: Wed Jan 07, 2009 8:18 pm
Location: Camden Haven Inlet, Mid-North Coast NSW.

Re: Freshwater tank

Postby Phillip » Sun Apr 03, 2011 8:00 am

Austin,

Yep, it's the breather to the water tank alright.
Mine goes up as high as within 300mm from the cabin roof and is hidden behind the small timber quad.

Glad I didn't rip it out during my cleanup :shock:

John & I had a look at his mk2 but could not find a breather. Any suggestions from Mk2 & 3 owners :?:

Phillip.
Phillip.
SEAKA
A 1969 Mark 1



Home port is at Dunbogan on the Camden Haven Inlet, Laurieton NSW
User avatar
Phillip
Site Admin
 
Posts: 1826
Images: 152
Joined: Wed Jan 07, 2009 8:18 pm
Location: Camden Haven Inlet, Mid-North Coast NSW.

Re: Freshwater tank

Postby Shaun » Fri Apr 29, 2011 8:10 am

Never found a breather vent on my last MkIII, but it could of been in a similar place to what has been mentioned above.
On Blue Moon there is no integrated water tank, it has either been :? grinded/ground out or not installed in the first place, & I find its a brilliant feature of BM, gives full 6'4" standing headroom at the foot of the steps & 6'2" in front of the sink :D , I simply use a 20lt water container strapped in on the floor of the fore-cabin, & have other 5 & 10lt containers stored in lockers
cheers
Camden Haven River,
Mid Nth Coast, NSW

Order of the Albatross - 2011
Order of the Tipping Dinghy
Shaun
 
Posts: 954
Images: 11
Joined: Tue Jan 06, 2009 10:27 pm

Re: Freshwater tank

Postby Phillip » Fri Apr 29, 2011 7:46 pm

Shaun,

All of the shoal draught Top Hats, like yours, lost the above keel water tank
because they needed the room for the ballast :o

Phillip

Sitting in the Mooloolaba Duck Pond for the next week waiting
for the swell to go down so I can cross the Wide Bay bar :roll:
Phillip.
SEAKA
A 1969 Mark 1



Home port is at Dunbogan on the Camden Haven Inlet, Laurieton NSW
User avatar
Phillip
Site Admin
 
Posts: 1826
Images: 152
Joined: Wed Jan 07, 2009 8:18 pm
Location: Camden Haven Inlet, Mid-North Coast NSW.


Return to Maintenance / Gear

Who is online

Users browsing this forum: No registered users and 210 guests

cron

x