tophatyachts.com

Hey All

On the old msn site there was someone in NSW with an outboard well plug that I made contact with...

If you still have it and interested in selling - message me on this site.

Apologies I have lost your contact details and was not sure if you ended up selling it.

Or to anyone else that may have one...

Cheers

Karl

HI KARL AND ALL I am looking for outboard well plug as well,or will consider pulling a mould of a well plug if someone could lend me there plug for two days in brisbane area.If any one can help please phone brett on 0402442043 0732664272

Gents,
I have one in Melbourne which I could loan for a mould if you are stuck.
Cheers,
Tom

Hi Karl,

I have the plug that you mentioned in your post, i havent considered selling it, but probably would as ive taken it off the boat & decided to leave it off for now, with an outboard going in & out of the well all the time, ive found storing the plug while motoring a problem,

I'll messege you later

cheers
shaun

Brett, if you cant find one locally, im a little bit closer (port macquarie), or if we have a get-together later in the year, i can bring it to that

Hi Shaun and Tom

Tom, thanks for the offer - will keep you in mind.

Shaun

Yeah later in th year sounds great. We get down to northern NSW a few times a year. If you get near brunswick heads/byron let us know or we are just off gateway in Brisbane.

Brett

Re Plugs
I am also looking for a plug for my mk3. It may of interest that a friend lent me his from a mk2 and the outboard well was a different size.
Cheers Phil

HI Phill thanks for that iteresting point on the outbord plug i have a mk2 with a factory well in it.I thourght thay were all the same but still looking for one Cheers Brett

Hi, I have just purchased a Top Hat that has an inboard diesel and a well plug that I am sailing up to the Sunshine coast so a mould coudl be made of that though there is no way that I want to sell it! So when I get it here a mould coudl be made. Cheers Peter

Can also confirm upon measuring my well plug is of a different size to what Karl needs (& both MkIII's), being cut-out by hand with a grinder at construction stage, it wouldn't surprise me if no two outboard wells are exactly the same.

Peter, Welcome to the site,
enjoy your sail to the Sunshine Coast, if you happen to stop in at Laurieton, on the Camden Haven River, leave a messege on the site, we have 5 Top Hats here.

Shaun

thanks mate, may well do that. Am planningto head north in March and was planning a non stop trip, but a few beers along the way may not go astray. Cheers Peter