New head

New head

Postby Sailtime » Sun May 28, 2017 6:29 pm

I've had my boat out of the water getting the engine mounts sorted out and have worked on a side project I've been thinking about for a while

The head under the v-berth has been the only part of my boat that i haven't been super stoked on.. it turns into an issue when the girls come along and moving the v berth around when under way is a hassle and sleeping above a recently used toilet not that romantic.

i've been jealous of the stand alone heads i've seen on other tophats so i moved it into the cabin. here's some photos

the toilet is a lavac marine head which a friend of mine has on his boat. direct pump out, no holding tank

mocked it up with cardboard first

cardboard.jpg
cardboard.jpg (421.8 KiB) Viewed 860 times


some cabin jigsaw work

Side.jpg
Side.jpg (371.62 KiB) Viewed 860 times


got epoxy involved
Thickened epoxy.jpg
Thickened epoxy.jpg (383.72 KiB) Viewed 860 times


Head wall.jpg
Head wall.jpg (389.76 KiB) Viewed 860 times


more jigsaw work using the cardboard template
Head2.jpg
Head2.jpg (357.92 KiB) Viewed 860 times


put some stain on it which i think looks cool
New head.jpg
New head.jpg (472.57 KiB) Viewed 860 times
Sailtime
 
Posts: 61
Joined: Tue Dec 22, 2015 5:34 pm

Re: New head

Postby Sailtime » Sun May 28, 2017 6:34 pm

the new toilet

Toilet.jpg
Toilet.jpg (395.05 KiB) Viewed 859 times


there were 4 thru hulls i removed that were no longer used. 2 were ancient, siezed and unmovable, the other 2 looked okay but were too far forward for where i wanted to run the plumbing
Thru hulls.jpg
Thru hulls.jpg (607.71 KiB) Viewed 859 times


Thru hull2.jpg
Thru hull2.jpg (500.69 KiB) Viewed 859 times


holes.jpg
holes.jpg (532.28 KiB) Viewed 859 times


i glassed over the holes and put in a couple of new trudesign thru hulls + seacocks

Seacocks2.jpg
Seacocks2.jpg (542.47 KiB) Viewed 859 times
Attachments
Thru hulls.jpg
Thru hulls.jpg (607.71 KiB) Viewed 859 times
Last edited by Sailtime on Sun May 28, 2017 6:57 pm, edited 1 time in total.
Sailtime
 
Posts: 61
Joined: Tue Dec 22, 2015 5:34 pm

Re: New head

Postby Sailtime » Sun May 28, 2017 6:50 pm

finally hooked the plumbing up.. working with that large hose is like wrestling a giant anaconda

Plumbing.jpg
Plumbing.jpg (390.2 KiB) Viewed 859 times


Seacocks.jpg
Seacocks.jpg (482 KiB) Viewed 859 times


While i was about it i also changed the thru hull + seacock for the engine water intake as suggested by phillip i think as well as the one under the sink so it's new seacocks all round

I had a great time doing this mod which i've been thinking about for sometime

few other little things - while engine was out cleaned bilge of 50 years of oil/gunk, replaced broken bilge pump and replaced the leaking drinking water hose

water hose and bilge pump.jpg
water hose and bilge pump.jpg (496.37 KiB) Viewed 859 times


glassed over broken speed log/transducer thruhull + 4 x new engine mounts
glassed over transducer.jpg
glassed over transducer.jpg (732.55 KiB) Viewed 859 times


lashed a solar panel to the starboard side to stop the house battery going flat
solar.jpg
solar.jpg (464.54 KiB) Viewed 859 times


finally put some new anti foul on the bottom
paint.jpg
paint.jpg (555.18 KiB) Viewed 859 times
Sailtime
 
Posts: 61
Joined: Tue Dec 22, 2015 5:34 pm

Re: New head

Postby Phillip » Mon May 29, 2017 10:16 pm

Lot of work done there mate! :o Well done!

Tell us, what is the extra fin you have over the top of the rudder in your last photo??
Phillip.
SEAKA
A 1969 Mark 1
http://www.sailblogs.com/member/seaka
http://skipr.net

Home port is at Dunbogan on the Camden Haven Inlet, Laurieton NSW
User avatar
Phillip
 
Posts: 1521
Images: 152
Joined: Wed Jan 07, 2009 8:18 pm
Location: Laurieton, NSW.

Re: New head

Postby Shaun » Tue May 30, 2017 9:48 am

Very impressive work Shea, good job!
Have you relocated the galley to somewhere else?
I was also wondering what that fin/skeg was above the rudder
cheers
"Blue Moon" MkIII Junkette rig,
Camden Haven River,
Mid Nth Coast, NSW

Order of the Albatross - 2011
Order of the Tipping Dinghy

The future belongs to those who believe in the beauty of their dreams. - Someone's random Youtube comment
User avatar
Shaun
 
Posts: 839
Images: 11
Joined: Tue Jan 06, 2009 10:27 pm

Re: New head

Postby Sailtime » Tue May 30, 2017 3:12 pm

yep i have no idea what that little fin thing is.. i've had a few opinions from some old timers at the yard one who thought it may have been added to improve stability in following seas?

dunno..

as far as the galley goes - the sink / icebox etc are on the starboard side, the new toilet is where the big stove/oven was sitting which I've taken out cause we don't use it.

the plan is to get a smaller little gimballed burner happening, at the moment we've been using a little butane burner camp stove sitting on the engine step..
Sailtime
 
Posts: 61
Joined: Tue Dec 22, 2015 5:34 pm

Re: New head

Postby Troppo » Sun Jun 04, 2017 9:13 am

Wow, totally awesome, Shea.

Huge amount of work. Gunna be so different to use when you get back out on the water. I really enjoyed seeing your pictures and following your repairs. Well done!

troppo
[Who is happy to be reading forum stuff again, he only got the Internet back on
yesterday evening since Telstra had been 'fixing' it for the past 50 days.]
Troppo
 
Posts: 794
Joined: Wed Mar 28, 2012 9:08 pm
Location: Rockhampton


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 1 guest

cron

x