Hi there
Is there any information and/or details on the dimensions of a furling genoa for a Mark 1, and could anyone tell me the height of the mast? I could go up with a tape measure, but I'm currently at home..!
Cheers, Tim
Leoden (Mooney Mooney)
Genoa/mast dimensions
3 posts
• Page 1 of 1
Genoa/mast dimensions
by TimothyH » Tue Feb 01, 2011 4:54 pm
- TimothyH
- Posts: 23
- Joined: Mon Aug 16, 2010 5:16 pm
Re: Genoa/mast dimensions
by Phillip » Tue Feb 01, 2011 5:18 pm
Hi Tim,
If you are going to fit a furler you will have to go up the mast as
there is the possibility of each mast being of a slightly different height,
depending on who made and fitted it!
Don't forget to measure the forestay while you are up there!
Good luck with the climb
Phillip
If you are going to fit a furler you will have to go up the mast as
there is the possibility of each mast being of a slightly different height,
depending on who made and fitted it!
Don't forget to measure the forestay while you are up there!
Good luck with the climb
Phillip
Phillip.
SEAKA
A 1969 Mark 1
Home port is at Dunbogan on the Camden Haven Inlet, Laurieton NSW
SEAKA
A 1969 Mark 1
Home port is at Dunbogan on the Camden Haven Inlet, Laurieton NSW
-
Phillip - Site Admin
- Posts: 1826
- Images: 152
- Joined: Wed Jan 07, 2009 8:18 pm
- Location: Camden Haven Inlet, Mid-North Coast NSW.
Re: Genoa/mast dimensions
by bearmcnally » Tue Feb 01, 2011 6:49 pm
Egret II's mast is about 31.0 ft by memory
cheers Bear
cheers Bear
-
bearmcnally - Posts: 632
- Images: 27
- Joined: Wed Feb 11, 2009 10:24 am
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 16 guests